Lube-Tips

Quick Filter Check

When checking differential filter clogging indicators, be sure that the pilot holes in the filter body (the ones that feed the indicator with oil pressure) are clear of debris. This will help ensure you are receiving the correct signal.

Unusual Breather Treatment

Washing down machinery with water often results in desiccant breathers becoming saturated with water. One solution is to put pantyhose over the breather. Though it may look silly, it repels the water yet allows air to move through it and is easier than training personnel over time.

Oil Sampling Pointer

For reservoirs, drop-tube oil sampling is rarely the ideal method. However, if it cannot be avoided, it is important to consistently sample as close to the active fluid zone as possible. Measure the stand-off distance desired from the bottom of the sump and attach the drop tube with wire ties (or other suitable method) that distance from the end of a rod. Consistency in the sample location will help make the analysis results more suitable for trending.

Use Lube ID Tags

Consider using equipment lube tags to avoid adding the wrong oil to a machine. These identification tags decrease the possibility of error by inexperienced lube techs, facilitate training of new technicians and reduce confusion associated with switching suppliers. Use color- and/ or shape-coding wherever possible. Whether plastic, stainless steel, aluminum or coated paperboard, these tags can indicate the lubricant’s name and viscosity, and can be affixed to each reservoir.

Did You Know?

Additional tips can be found in our Lube-Tips email newsletter. To receive the Lube-Tips newsletter, subscribe now at MachineryLubrication.com

Have Some Tips?

If you have a tip to share, email it to admin@machinerylubricationindia.com